Jump to content
DOSBODS
  • Welcome to DOSBODS

     

    DOSBODS is free of any advertising.

    Ads are annoying, and - increasingly - advertising companies limit free speech online. DOSBODS Forums are completely free to use. Please create a free account to be able to access all the features of the DOSBODS community. It only takes 20 seconds!

     

Recommended Posts

In the past when I had log burners, I got somebody to make a custom 'register plate'...so flue, into register plate then into the chimney 'void'

BUT back then I had proper fireplaces...

Now I have a freestanding log burner and the flue goes into the wall at 45 degrees then joins onto a flexible stainless flue pipe

The flue pipe is 15cm diameter going into a 25cm square hole so there are gaps which let cold air in

Can I fill the hole with rockwool or expanding foam?

Also where the flexible pipe exits the chimney there is an air gap....I nearly cemented the whole lot in (one guy told me to do that) but I left a gap cos somebody else said the air needs to expand as it gets heated!

Thanks!

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...