Cast iron pan support repair weld fix?

[Herby]

So I am renting a place with a a rare model of gas hob with electric cooker. One of the pan supports was extremely out of line so I tried to gently bend one of the supports. FFS it snapped. Anybody know if they can be welded back on? Looks like quite dark carbon cast iron. Otherwise does JB weld hold during heat? 

It's kind of like one of these: https://www.buyspares.co.uk/product.pl?pid=1745761&utm_source=google&utm_medium=base&utm_campaign=products&gclid=CjwKCAjwkN6EBhBNEiwADVfya7ra-n__uSAI88e5TIzAhI34g8nsZDVmVq0NctAqZxd5tgpGZE6SFBoCa7EQAvD_BwE

[XswampyX]

25 minutes ago, Herby said:

So I am renting a place with a a rare model of gas hob with electric cooker. One of the pan supports was extremely out of line so I tried to gently bend one of the supports. FFS it snapped. Anybody know if they can be welded back on? Looks like quite dark carbon cast iron. Otherwise does JB weld hold during heat? 

It's kind of like one of these: https://www.buyspares.co.uk/product.pl?pid=1745761&utm_source=google&utm_medium=base&utm_campaign=products&gclid=CjwKCAjwkN6EBhBNEiwADVfya7ra-n__uSAI88e5TIzAhI34g8nsZDVmVq0NctAqZxd5tgpGZE6SFBoCa7EQAvD_BwE

Weld it with dissimilar rods.  

[onlyme]

2 hours ago, Herby said:

So I am renting a place with a a rare model of gas hob with electric cooker. One of the pan supports was extremely out of line so I tried to gently bend one of the supports. FFS it snapped. Anybody know if they can be welded back on? Looks like quite dark carbon cast iron. Otherwise does JB weld hold during heat? 

It's kind of like one of these: https://www.buyspares.co.uk/product.pl?pid=1745761&utm_source=google&utm_medium=base&utm_campaign=products&gclid=CjwKCAjwkN6EBhBNEiwADVfya7ra-n__uSAI88e5TIzAhI34g8nsZDVmVq0NctAqZxd5tgpGZE6SFBoCa7EQAvD_BwE

What make/model?

Cast iron tricky to weld and needs pre-heating. Don't think JB weld will stand the heat at all. 

[Herby]

11 hours ago, onlyme said:

What make/model?

Cast iron tricky to weld and needs pre-heating. Don't think JB weld will stand the heat at all. 

Flavel Milan 100 mln10fr

Right side stand (one tiny, one large)

[Option5]

https://www.flavelparts.co.uk/cooker-oven/ml5cdw-7721186345/catalogue.pl?path=937031&model_ref=923443&page=5

You need to enter your serial number

Edited May 10, 2021 by Option5

[onlyme]

25 minutes ago, Herby said:

Flavel Milan 100 mln10fr

Right side stand (one tiny, one large)

Looks promising - even if not exactly the same model no. to match something like a pan support may unlikely change over time and different ranges as pattern part likely bought in anyway.

https://www.partmaster.co.uk/flavel/cooker-oven/pan-support/catalogue.pl?shop=flavel&path=297853&refine=pan support